Free cardinal SVG

Cardinal on a branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Cardinal on a branch, as a solid black shape
Cardinal on a branch. The preview is the SVG file itself.

A cardinal in profile on a leafy branch: pointed crest, thick beak, the edge of its face mask cut as a curve, a folded wing and a long tail hanging below the branch. The all-round cardinal for cards and signs.

What is in the file

Size100 × 95 mm (3.94 × 3.74 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length832 mm at this size
Narrowest part1 mm at this size
Nodes216 curve and line segments

Measured from the file. PNG: 2,000 × 1,906 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.95 in (25 × 24 mm)0.25 mm211 mm100Too fine for most machines
2 × 1.9 in (51 × 48 mm)0.51 mm423 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.85 in (76 × 72 mm)0.76 mm634 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.8 in (102 × 97 mm)1 mm845 mm6Vinyl, card and thin sheet
6 × 5.71 in (152 × 145 mm)1.5 mm1,268 mm2Vinyl, card and thin sheet
8 × 7.61 in (203 × 193 mm)2 mm1,691 mm1Vinyl, card and thin sheet
12 × 11.41 in (305 × 290 mm)3 mm2,536 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More cardinal SVG files

← Layered red cardinal in four colours All 13 cardinals Cardinal bird →