Free Bride SVG

Bride outline lettering SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Bride outline lettering, drawn as a line
Bride outline lettering. The preview is the SVG file itself.

“Bride” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

What is in the file

Size100 × 30 mm (3.94 × 1.18 in), scales to any size
Pieces10 separate pieces
Outlines to cut20: 10 outer edges and 10 cut-outs
Cut length963 mm at this size
Narrowest part1.7 mm at this size
Nodes229 curve and line segments

Measured from the file. PNG: 2,000 × 654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.43 mm245 mm240Too fine for most machines
2 × 0.6 in (51 × 15 mm)0.86 mm489 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.9 in (76 × 23 mm)1.3 mm734 mm33Vinyl, card and thin sheet
4 × 1.2 in (102 × 30 mm)1.7 mm978 mm16Vinyl, card and thin sheet
6 × 1.8 in (152 × 46 mm)2.6 mm1,468 mm6Vinyl, card and thin sheet
8 × 2.4 in (203 × 61 mm)3.5 mm1,957 mm4Any material, including 3 mm wood and acrylic
12 × 3.6 in (305 × 91 mm)5.2 mm2,935 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bride SVG files

← Bride with hearts All 13 Bride designs Bride stencil plate →