Born to Hunt with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Born to Hunt Forced to Work” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 72 mm (3.94 × 2.85 in), scales to any size |
|---|---|
| Pieces | 14 separate pieces |
| Outlines to cut | 34: 14 outer edges and 20 cut-outs |
| Cut length | 1,969 mm at this size |
| Narrowest part | 3.8 mm at this size |
| Nodes | 737 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,467 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.72 in (25 × 18 mm) | 0.97 mm | 500 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.45 in (51 × 37 mm) | 1.9 mm | 1,000 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.17 in (76 × 55 mm) | 2.9 mm | 1,500 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.89 in (102 × 73 mm) | 3.9 mm | 2,001 mm | 6 | Any material, including 3 mm wood and acrylic |
| 6 × 4.34 in (152 × 110 mm) | 5.8 mm | 3,001 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.78 in (203 × 147 mm) | 7.7 mm | 4,001 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.68 in (305 × 220 mm) | 12 mm | 6,002 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Born to Hunt Forced to Work SVG files
-
Born to Hunt with a buck Solid · 17 pieces
-
Born to Hunt in Pacifico Solid · 8 pieces
-
Born to Hunt in Lobster Solid · 13 pieces
-
Born to Hunt in Kaushan Script Solid · 21 pieces
-
Born to Hunt in Lilita One Solid · 22 pieces
-
Born to Hunt in Alfa Slab One Solid · 21 pieces
-
Born to Hunt in Amatic SC Solid · 22 pieces
-
Born to Hunt in block capitals Solid · 22 pieces
← Born to Hunt stencil plate All 13 Born to Hunt Forced to Work designs Born to Hunt with a buck →