Free Bless Your Heart SVG

Bless Your Heart outline lettering SVG

Bless Your Heart outline lettering, drawn as a line
Bless Your Heart outline lettering. The preview is the SVG file itself.

“Bless Your Heart” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 37 mm (3.94 × 1.44 in), scales to any size
Pieces15 separate pieces
Outlines to cut40: 15 outer edges and 25 cut-outs
Cut length1,123 mm at this size
Narrowest part1 mm at this size
Nodes438 curve and line segments

Measured from the file. PNG: 2,000 × 783 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.37 in (25 × 9 mm)0.25 mm285 mm210Too fine for most machines
2 × 0.73 in (51 × 19 mm)0.51 mm570 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.1 in (76 × 28 mm)0.76 mm856 mm27Fine detail: vinyl and paper only, weed with care
4 × 1.47 in (102 × 37 mm)1 mm1,141 mm14Vinyl, card and thin sheet
6 × 2.2 in (152 × 56 mm)1.5 mm1,711 mm5Vinyl, card and thin sheet
8 × 2.94 in (203 × 75 mm)2 mm2,282 mm3Vinyl, card and thin sheet
12 × 4.4 in (305 × 112 mm)3 mm3,423 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bless Your Heart SVG files

← Bless Your Heart with hearts All 12 Bless Your Heart designs Bless Your Heart stencil plate →