Free Bless the Food Before Us SVG

Bless the Food Before Us in Lilita One SVG

Bless the Food Before Us in Lilita One, as a solid black shape
Bless the Food Before Us in Lilita One. The preview is the SVG file itself.

“Bless the Food Before Us” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 31 mm (3.94 × 1.2 in), scales to any size
Pieces20 separate pieces
Outlines to cut32: 20 outer edges and 12 cut-outs
Cut length781 mm at this size
Narrowest part2.3 mm at this size
Nodes380 curve and line segments

Measured from the file. PNG: 2,000 × 663 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.31 in (25 × 8 mm)0.58 mm198 mm240Fine detail: vinyl and paper only, weed with care
2 × 0.61 in (51 × 15 mm)1.2 mm397 mm75Vinyl, card and thin sheet
3 × 0.91 in (76 × 23 mm)1.8 mm595 mm30Vinyl, card and thin sheet
4 × 1.22 in (102 × 31 mm)2.3 mm793 mm16Vinyl, card and thin sheet
6 × 1.83 in (152 × 46 mm)3.5 mm1,190 mm6Any material, including 3 mm wood and acrylic
8 × 2.44 in (203 × 62 mm)4.7 mm1,587 mm4Any material, including 3 mm wood and acrylic
12 × 3.66 in (305 × 93 mm)7 mm2,380 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Bless the Food Before Us SVG files

← Bless the Food Before Us in Lobster All 10 Bless the Food Before Us designs Bless the Food Before Us in Amatic SC →