Free Birthday Queen SVG

Birthday Queen in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Birthday Queen in Lilita One, as a solid black shape
Birthday Queen in Lilita One. The preview is the SVG file itself.

“Birthday Queen” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 54 mm (3.94 × 2.11 in), scales to any size
Pieces14 separate pieces
Outlines to cut21: 14 outer edges and 7 cut-outs
Cut length875 mm at this size
Narrowest part2.8 mm at this size
Nodes267 curve and line segments

Measured from the file. PNG: 2,000 × 1,110 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.54 in (25 × 14 mm)0.71 mm222 mm160Fine detail: vinyl and paper only, weed with care
2 × 1.07 in (51 × 27 mm)1.4 mm445 mm45Vinyl, card and thin sheet
3 × 1.61 in (76 × 41 mm)2.1 mm667 mm18Vinyl, card and thin sheet
4 × 2.15 in (102 × 55 mm)2.8 mm889 mm10Vinyl, card and thin sheet
6 × 3.22 in (152 × 82 mm)4.3 mm1,333 mm3Any material, including 3 mm wood and acrylic
8 × 4.3 in (203 × 109 mm)5.7 mm1,778 mm2Any material, including 3 mm wood and acrylic
12 × 6.44 in (305 × 164 mm)8.5 mm2,667 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Birthday Queen SVG files

← Birthday Queen in Kaushan Script All 13 Birthday Queen designs Birthday Queen in Alfa Slab One →