Free Best Uncle Ever SVG

Best Uncle Ever in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Best Uncle Ever in Alfa Slab One, as a solid black shape
Best Uncle Ever in Alfa Slab One. The preview is the SVG file itself.

“Best Uncle Ever” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size92 × 100 mm (3.63 × 3.94 in), scales to any size
Pieces13 separate pieces
Outlines to cut18: 13 outer edges and 5 cut-outs
Cut length1,263 mm at this size
Narrowest part3.3 mm at this size
Nodes250 curve and line segments

Measured from the file. PNG: 1,850 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.92 × 1 in (23 × 25 mm)0.84 mm321 mm100Fine detail: vinyl and paper only, weed with care
1.84 × 2 in (47 × 51 mm)1.7 mm642 mm25Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)2.5 mm962 mm12Vinyl, card and thin sheet
3.69 × 4 in (94 × 102 mm)3.4 mm1,283 mm6Any material, including 3 mm wood and acrylic
5.53 × 6 in (141 × 152 mm)5 mm1,925 mm2Any material, including 3 mm wood and acrylic
7.38 × 8 in (187 × 203 mm)6.7 mm2,566 mm1Any material, including 3 mm wood and acrylic
11.06 × 12 in (281 × 305 mm)10 mm3,850 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Best Uncle Ever SVG files

← Best Uncle Ever in Lilita One All 13 Best Uncle Ever designs Best Uncle Ever in Amatic SC →