Be a Cupcake with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Be a Cupcake in a World Full of Muffins” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 68 mm (3.94 × 2.67 in), scales to any size |
|---|---|
| Pieces | 17 separate pieces |
| Outlines to cut | 44: 17 outer edges and 27 cut-outs |
| Cut length | 2,352 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 993 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,381 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.68 in (25 × 17 mm) | 0.58 mm | 597 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.36 in (51 × 34 mm) | 1.2 mm | 1,195 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2.03 in (76 × 52 mm) | 1.8 mm | 1,792 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.71 in (102 × 69 mm) | 2.3 mm | 2,390 mm | 8 | Vinyl, card and thin sheet |
| 6 × 4.07 in (152 × 103 mm) | 3.5 mm | 3,584 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.42 in (203 × 138 mm) | 4.7 mm | 4,779 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 8.14 in (305 × 207 mm) | 7 mm | 7,169 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Be a Cupcake in a World Full of Muffins SVG files
-
Be a Cupcake with a cupcake Solid · 26 pieces
-
Be a Cupcake in Pacifico Solid · 12 pieces
-
Be a Cupcake in Lobster Solid · 10 pieces
-
Be a Cupcake in Lilita One Solid · 33 pieces
-
Be a Cupcake in Amatic SC Solid · 31 pieces
-
Be a Cupcake in block capitals Solid · 31 pieces
-
Be a Cupcake in script and capitals Solid · 25 pieces
-
Be a Cupcake with hearts Solid · 16 pieces
← Be a Cupcake stencil plate All 11 Be a Cupcake in a World Full of Muffins designs Be a Cupcake with a cupcake →