Free Baking Spirits Bright SVG

Baking Spirits Bright in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baking Spirits Bright in Lilita One, as a solid black shape
Baking Spirits Bright in Lilita One. The preview is the SVG file itself.

“Baking Spirits Bright” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 35 mm (3.94 × 1.39 in), scales to any size
Pieces23 separate pieces
Outlines to cut31: 23 outer edges and 8 cut-outs
Cut length805 mm at this size
Narrowest part1.9 mm at this size
Nodes335 curve and line segments

Measured from the file. PNG: 2,000 × 754 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.35 in (25 × 9 mm)0.48 mm204 mm220Too fine for most machines
2 × 0.7 in (51 × 18 mm)0.97 mm409 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.06 in (76 × 27 mm)1.4 mm613 mm27Vinyl, card and thin sheet
4 × 1.41 in (102 × 36 mm)1.9 mm818 mm14Vinyl, card and thin sheet
6 × 2.11 in (152 × 54 mm)2.9 mm1,227 mm5Vinyl, card and thin sheet
8 × 2.82 in (203 × 72 mm)3.9 mm1,636 mm4Any material, including 3 mm wood and acrylic
12 × 4.22 in (305 × 107 mm)5.8 mm2,454 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Baking Spirits Bright SVG files

← Baking Spirits Bright in Lobster All 11 Baking Spirits Bright designs Baking Spirits Bright in Amatic SC →