Free Aunt SVG

Aunt stencil plate SVG

Aunt stencil plate, as a solid black shape — Aunt stencil plate. The preview is the SVG file itself.

A rounded plate with “AUNT” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 48 mm (3.94 × 1.91 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	843 mm at this size
Narrowest part	1.7 mm at this size
Nodes	56 curve and line segments

Measured from the file. PNG: 2,000 × 1,008 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.48 in (25 × 12 mm)	0.43 mm	214 mm	170	Too fine for most machines
2 × 0.97 in (51 × 25 mm)	0.86 mm	428 mm	50	Fine detail: vinyl and paper only, weed with care
3 × 1.45 in (76 × 37 mm)	1.3 mm	642 mm	21	Vinyl, card and thin sheet
4 × 1.94 in (102 × 49 mm)	1.7 mm	856 mm	10	Vinyl, card and thin sheet
6 × 2.9 in (152 × 74 mm)	2.6 mm	1,285 mm	3	Vinyl, card and thin sheet
8 × 3.87 in (203 × 98 mm)	3.5 mm	1,713 mm	2	Any material, including 3 mm wood and acrylic
12 × 5.81 in (305 × 148 mm)	5.2 mm	2,569 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Aunt SVG files

← Aunt outline lettering All 12 Aunt designs Aunt with a drop shadow →