Free As for Me and My House SVG

As for Me and My House in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

As for Me and My House in Lobster, as a solid black shape
As for Me and My House in Lobster. The preview is the SVG file itself.

“As for Me and My House” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 43 mm (3.94 × 1.7 in), scales to any size
Pieces6 separate pieces
Outlines to cut12: 6 outer edges and 6 cut-outs
Cut length763 mm at this size
Narrowest part0.7 mm at this size
Nodes385 curve and line segments

Measured from the file. PNG: 2,000 × 908 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.43 in (25 × 11 mm)0.18 mm194 mm190Too fine for most machines
2 × 0.86 in (51 × 22 mm)0.36 mm388 mm55Too fine for most machines
3 × 1.3 in (76 × 33 mm)0.53 mm581 mm24Fine detail: vinyl and paper only, weed with care
4 × 1.73 in (102 × 44 mm)0.71 mm775 mm12Fine detail: vinyl and paper only, weed with care
6 × 2.59 in (152 × 66 mm)1.1 mm1,163 mm4Vinyl, card and thin sheet
8 × 3.46 in (203 × 88 mm)1.4 mm1,550 mm3Vinyl, card and thin sheet
12 × 5.18 in (305 × 132 mm)2.1 mm2,326 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More As for Me and My House SVG files

← As for Me and My House in Pacifico All 13 As for Me and My House designs As for Me and My House in Kaushan Script →