Free Ain’t No Hood Like Motherhood SVG

No Hood Like Motherhood in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

No Hood Like Motherhood in Lilita One, as a solid black shape
No Hood Like Motherhood in Lilita One. The preview is the SVG file itself.

“Ain’t No Hood Like Motherhood” set in Lilita One, a chunky rounded sans, on 3 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 49 mm (3.94 × 1.93 in), scales to any size
Pieces27 separate pieces
Outlines to cut38: 27 outer edges and 11 cut-outs
Cut length1,017 mm at this size
Narrowest part1.9 mm at this size
Nodes363 curve and line segments

Measured from the file. PNG: 2,000 × 1,021 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.49 in (25 × 12 mm)0.48 mm258 mm170Too fine for most machines
2 × 0.98 in (51 × 25 mm)0.97 mm517 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.47 in (76 × 37 mm)1.4 mm775 mm21Vinyl, card and thin sheet
4 × 1.96 in (102 × 50 mm)1.9 mm1,033 mm10Vinyl, card and thin sheet
6 × 2.95 in (152 × 75 mm)2.9 mm1,550 mm3Vinyl, card and thin sheet
8 × 3.93 in (203 × 100 mm)3.9 mm2,067 mm2Any material, including 3 mm wood and acrylic
12 × 5.89 in (305 × 150 mm)5.8 mm3,100 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ain’t No Hood Like Motherhood SVG files

← No Hood Like Motherhood in Kaushan Script All 13 Ain’t No Hood Like Motherhood designs No Hood Like Motherhood in Alfa Slab One →