Free A Little Dirt Never Hurt SVG

A Little Dirt Never Hurt in Alfa Slab One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

A Little Dirt Never Hurt in Alfa Slab One, as a solid black shape
A Little Dirt Never Hurt in Alfa Slab One. The preview is the SVG file itself.

“A Little Dirt Never Hurt” set in Alfa Slab One, a very heavy slab serif, on 3 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

What is in the file

Size100 × 56 mm (3.94 × 2.21 in), scales to any size
Pieces20 separate pieces
Outlines to cut25: 20 outer edges and 5 cut-outs
Cut length1,046 mm at this size
Narrowest part1.9 mm at this size
Nodes337 curve and line segments

Measured from the file. PNG: 2,000 × 1,158 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.56 in (25 × 14 mm)0.48 mm266 mm160Too fine for most machines
2 × 1.12 in (51 × 29 mm)0.97 mm531 mm45Fine detail: vinyl and paper only, weed with care
3 × 1.69 in (76 × 43 mm)1.4 mm797 mm18Vinyl, card and thin sheet
4 × 2.25 in (102 × 57 mm)1.9 mm1,063 mm8Vinyl, card and thin sheet
6 × 3.37 in (152 × 86 mm)2.9 mm1,594 mm3Vinyl, card and thin sheet
8 × 4.5 in (203 × 114 mm)3.9 mm2,125 mm2Any material, including 3 mm wood and acrylic
12 × 6.74 in (305 × 171 mm)5.8 mm3,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More A Little Dirt Never Hurt SVG files

← A Little Dirt Never Hurt in Lilita One All 13 A Little Dirt Never Hurt designs A Little Dirt Never Hurt in Amatic SC →